* You can download the detailed product manual from our website (DR900X-2CH / DR900X-2CH Plus).
NOTE: The 900X and 900X Plus cameras are basically the same but different in two features: (1) the rear cameras are different for two channels; and (2) X Plus cameras can be used as a hot spot for other cameras.
DR900X-2CH at a Glance
The following diagrams explain each part of the BlackVue dashcam.
A) Lock button
B) Mounting bracket
C) Front security LED:
: Lights on during (i) normal mode, (ii) an event is being recorded (impact detected), (iii) manual recording has started, or (iv) motion is detected in parking mode
: Blinks slowly during parking mode motion detection standby
D) Camera lens
A) GPS/BT LED:
: Lights blue when GPS is on.
: blinks blue quickly when GPS is turning off.
C) Recording LED:
: Lights orange in normal mode.
: Lights red when (i) an event is being recorded (impact detected), or (ii) manual recording has started.
: Lights green in parking mode when motion is detected.
D) LTE/Wi-Fi LED:
: Lights yellow when LTE is connected.
: Lights white when Wi-Fi is connected.
: Blinks white slowly when connecting to Wi-Fi.
: Blinks white quickly when Wi-Fi is turning off.
A) Proximity Sensor LED:
: Lights when the proximity sensor is triggered.
B) Proximity Sensor:
Touch or wave a finger within 20mm of the sensor to trigger a customizable function.
• Available options:
– Turn on/off audio recording (default)
– Manual recording trigger
A) Micro USB port
B) DC in (power connector)
C) microSD card slot
D) Wi-Fi button: Press once to turn on/off Wi-Fi.
A) Mounting bracket
B) Camera lens
A) V out (Front camera connection port)
B) Rear security LED
: Stays on in all recording modes but can be turned off from firmware settings.
- There may be some variation in the actual recording time
- If the microSD card is full, older files are deleted first to make space for newly-recorded videos. If possible, backup important files such as Event recording files.