We're here to help

Change / Reset Camera WiFi Name and/or Password

    Follow

    Reset WiFi Name and Password via WiFi Button (DR590W, DR650GW, DR650S, DR750S, DR900S Series)

    1. Turn on the dashcam until it fully boots up and says "Starting Normal Recording"

    2. Press and hold the Wi-Fi button until the beep.

    3. After the voice prompt, press the button once to reset the WiFi name and password to default.

    NOTE: The DR900S, DR750S and DR590W Series introduces unique Wi-Fi passwords instead of the default “blackvue” password for DR650GW and DR650S models. The password is printed on the label, which can be checked by removing the dashcam from its mount. 

     

     

    Change/Reset via BlackVue Cloud App (Cloud-Compatible DR650GW, DR650S, DR750S/X, DR900S/X Series)

    NOTE: You can access FW settings Over the Cloud only when the dashcam is ON and connected to the internet (Cloud). A blue-colored icon means the dashcam is connected to the Cloud while a grey-colored icon means that the dashcam is disconnected from the Cloud.

     

    1.   Login to the BlackVue app.

    2.   Select BLACKVUE CLOUD.

    3.  Tap next to your camera name and select Settings > Firmware > Wi-Fi > Login credentials. You can change the camera’s SSID and Wi-Fi login password.

    blackvue-app-changing-wi-fi-login-ssid

     4.   Go back to the Firmware settings menu, tap < and tap Save.

    blackvue-app-changing-wi-fi-login-ssid-save-capture

     

     

    Change/Reset via BlackVue PC Viewer (DR590W, DR650GW, DR650S, DR750S/X, DR900S/X Series)

    For both Windows or MAC Users (SD Card Viewer)

    1. Remove the microSD card from the dashcam.
    2. Insert the card into the microSD card reader and connect it to a computer.
    3. Launch BlackVue Viewer. Select SD Card Viewer.
    *You can download BlackVue Viewer from www.blackvue.com > Support > Downloads and install it on your computer.
    4. In BlackVue Viewer click on the  Settings button to open the BlackVue settings panel.
    5. Click the Firmware tab, then the Wi-Fi tab, and under Login credentials change the password.

    * The dashcam's Wi-Fi password is case sensitive which means that upper case " A " and lower case " a " are considered different letters.
    6. Click Save and close.

     

    For both Windows or MAC Users (Cloud Viewer)

    1. Launch BlackVue Viewer. Select Cloud Viewer.
    *You can download BlackVue Viewer from www.blackvue.com > Support > Downloads and install it on your computer.

    2. Click Account > Login. Enter email and password then press the Login button.
    3. From the camera from the list of My camera(s) and click the three vertical dots icon to reveal camera options.

    *The camera should be connected to the Cloud when changing/resetting the WiFi ID and password.

    4. Select Camera settings and go to the Firmware tab. Under this tab, select the Wi-Fi tab.
    5. Type your desired camera WiFi name in the SSID field and your desired password.

    * The dashcam's Wi-Fi password is case sensitive which means that upper case " A " and lower case " a " are considered different letters. The WiFi password should not contain any special character.

    * Alternatively, you can press the Reset button at the bottom-left part of the pop-up window to go back to the original SSID and Password.
    6. Click Save and close.

     

    Powered by Zendesk