We're here to help

Dashcam is not recording / No recording

    Follow

     

    Issue Problem Cause / Description Things to check / Solution(s)
    No Normal Files Recorded at all (Front and Rear Cameras) Normal Recording Option is set to OFF Access your camera's firmware settings and go to Basic > Recording > Normal Recording > ON
    Save settings and allow camera to reboot.
    No Normal Files Recoded when Driving (Front and Rear Cameras) G-sensor (Normal Mode) settings are too high
    The camera may record few normal and parking files upon engine on if the driver does not step on the accelerator pedal for at least five minutes. Upon stepping on the accel pedal, the first recording file is an Event file.
    Lower down the value of the G-senor (Normal Mode) to about 5 (or mid-setting) for all three axes.
    Go to Firmware Settings > Sesnsitivity > G-sensor (Normal Mode) > 5
    Save settings and allow camera to reboot.
    Speed alert is on and the speed limit is set to either 0 or very low value (kph / mph)
    The camera may record few normal and parking files upon engine on if the driver does not step on the accelerator pedal for at least five minutes. Upon stepping on the accel pedal, the first recording file is an Event file.
    Deactivate the Speed alert setting. If on, set the value in accordance to local speed limit values (e.g. 30kph, 60kph etc.)
    Go to Firmware Settings > System > Speed Alert > OFF
    Alternatively, go to Firmware Settings > System > Speed Alert > Select either kph or mph > Speed limit value
    Save settings and allow camera to reboot.
    No Parking Files Recorded at all (Front and Rear Cameras) Parking Recording Option is set to OFF Access your camera's firmware settings and go to Basic > Recording > Parking Recording > Motion&Impact Recording or Time lapse
    Save settings and allow camera to reboot.
    No Manual Recording (Front and Rear Cameras) The Proximity Sensor is either set to OFF or Voice Recording

    (Only applies to cameras with proximity sensor)
    Activate the manual recording function by accessing your Firmware Settings > System > Proximity Sensor > Manual recording.

    Save settings and allow camera to reboot.
    The Proximity Sensor is defective. Change your proximity sensor setting to Voice Recording. Access your Firmware Settings > System > Proximity Sensor > Voice recording. Save settings and allow camera to reboot.

    After normal reboot, confirm if Voice Recording can be activated/deactivate by waving a finger or touching the sensor. If nothing happens, the proximity sensor is faulty and should be replaced.
    Camera model does not have a proximity sensor Upgrade to a newer camera model
    No Event Fille Recorded (Front and Rear Cameras) No Event File recorded in Driving mode G-sensor (Normal Mode) set to very low values.

    Go to Firmware Settings > Sesnsitivity > G-sensor (Normal Mode) > 5
    Save settings and allow camera to reboot.
    No Event File recorded in Parking mode G-sensor (Normal Mode) set to very low values. / Motion Detection (Parking Mode) is either Off (0) of less sensitive.

    Go to Firmware Settings > Sesnsitivity > G-sensor (Parking Mode) > 8 or 9
    Go to Firmware Settings > Sesnsitivity > Motion Detection (Parking Mode) > 4 or 5
    Save settings and allow camera to reboot.
    No recordings found at all for all Recording Modes
    (Front and Rear Cameras)
    The camera continues to record like usual but no recordings can be found in the SD card. Due to SD card error, the camera cannot produce records and save them in the card.

    Format the SD card and insert it back to the slot in the camera. If the issue persists, try a different SD card.
    The camera does not respond or proceed to normal booting Power off camera, take out the SD card, format it, and copy the appropriate firmware into the blank SD card. Insert the SD card into the SD card slot of the camera and wait for normal booting to proceed.

    If the camera continue not to respond, it may need some repair work.
    No Rear Camera Recordings Rear camera does not record in all modes (Normal, Event, Parking, Manual)

    No or disrupted connection between front and rear cameras
    Check the connection ports of both cameras as well as the pin condition of the connecting cable for any damage.

    If no visible damage is found, turn off the dashcam and remove cable from both cameras. Reconnect the cable until there is a "clicking" sound and power on the camera once again.

    If the issue persist, the camera may need some repair work.
    Rear camera does not record in Parking Mode

    Rear camera recording in parking mode is deactivated
    Activate the setting by going to Firmware Settings > Basic > Recording > Rear camera recording in parking mode > ON

    If the issue persist, check connection ports and cable pin ends for damage. If no damage found, the camera may need some repair work.
    *Settings may vary according to firmware version and camera model.

     

     

    Powered by Zendesk