Issue | Problem Cause / Description | Things to Check / Solution(s) |
Power Magic Pro Does Not Turn On (LED light not on) | GROUND wire is not properly connected | Find a bolt in a suitable location near the fusebox and ensure proper connection of the GROUND wire end to the bolt. |
Power Magic Pro Does not power camera (LED light on) | Faulty female connector/output wires of PMP to the camera | Inspect for any damage on the cable. If no obvious damage is seen, a replacement may be required. |
Power Magic Pro drains my battery | Red wire is connected to CONSTANT and Yellow wire is connected to ACC. | Red wire should be connected to ACC and Yellow wire to CONSTANT fuse in the car's fusebox |
Both red and yellow wires are connected to CONSTANT fuse. | Red wire should be connected to ACC and Yellow wire to CONSTANT fuse in the car's fusebox | |
Power Magic Pro immediately turns off after engine off | Both red and yellow wires are connected to ACC fuse. | Red wire should be connected to ACC and Yellow wire to CONSTANT fuse in the car's fusebox |
You may contact your seller for a replacement if the issue is not solved.