DR750X-3CH Plus Series (3CH, 3CH Truck, 3CH DMS, & 3CH DMS Truck)

This camera model is available in four different varieties. A newer version of the 3CH camera without the DMS is the DR770X BOX Series.

DR750X-3CH Plus
DR750X-3CH Truck Plus
DR750X-3CH DMS Plus
DR750X-3CH DMS Truck Plus

* You can access the complete manual on our Manuals Website here.

DR750X-3CH Plus at a Glance

The following diagrams explain each part of the BlackVue dashcam.

Front Camera

dr900x-1ch-front-side-image

A) Lock button
B) Mounting bracket
C) Front security LED:
: Lights on during (i) normal mode, (ii) an event is being recorded (impact detected), (iii) manual recording has started, or (iv) motion is detected in parking mode.
: Blinks slowly during parking mode motion detection standby.
D) Camera lens

A) GPS LED:
: Lights blue when GPS is on.
: Blinks blue quickly when GPS is turning off.
B) Speaker
C) Recording LED:
: Lights orange in normal mode.
: Lights red when (i) an event is being recorded (impact detected), or (ii) manual recording has started.
: Lights green in parking mode when motion is detected.
D) Bluetooth/ Wi-Fi/ LTE LED:
: Lights yellow when LTE is connected.
: Lights white when Wi-Fi is connected.
: Blinks Yellow slowly when Bluetooth is paired.
: Blinks Yellow quickly when Bluetooth is in pairing mode.

dashcam-sideview-image

A) Proximity Sensor LED:
: Lights when the proximity sensor is triggered.
B) Proximity Sensor:
Touch or wave a finger within 20mm of the sensor to trigger a customizable function.
• Available options:
– Turn on/off audio recording (default)
– Manual recording trigger
– Off

A) Micro USB port
B) DC in (power connector)
C) microSD card slot
D) Wi-Fi button: Press once to turn on/off Wi-Fi.
E) Cover

Interior camera

A) Mounting bracket
B) Camera lens
C) Illumination sensor
D) IR LED

A) V out (Front camera connection port)
B) Security LED
: Stays ON in all recording modes.

The illumination sensor detects when it is dark and activates the IR LEDs for optimal interior recording.

Regular Rear camera

x-series-rear-camera-views-drawing

A) Mounting bracket
B) Camera lens

x-series-rear-camera-side-views-drawing

A) V out (Front camera connection port)
B) Rear security LED
: Stays on in all recording modes but can be turned off from firmware settings.

Truck Rear camera

A) Illumination Sensor
B) Camera Lens
C) V out (Front camera connection port)
D) External Mounting Bracket
E) IR LED
F) Hood

The illumination sensor detects when it is dark and activates the 6 IR LEDs which help to pick up more detail in dark areas.

The rear camera housing is completely dust-proof and waterproof (tested to function normally after being immersed in 1m of water for 30 minutes). The integrated hood helps shield the lens from the elements.