New post
0

How can i power off the IR LED in Rear-Cam?

The IR LED reflections at the rear Window are very bad. Can i power off the LED or must use a pice of tape  :-)

7 comments

  • 0
    Avatar
    Chris

    Hello Norbert Lehmann,

    You can turn off the security LED on the IR camera of DR650S-2CH from the dashcams settings:


    I hope it helps.

     

    Best Regards

    BlackVue Support Team

  • 0
    Avatar
    Norbert Lehmann

    I do not mean the security LED. I want to power off the two IR LED  Rear Cam.
    I mean the two IR LEDs on the back camera. Infrared light of the two IR lLED´s on the right and left side of the camera lens are reflected in the rear window and no recording at night is possible.
    Sorry, but my english ist very bad :(

  • 0
    Avatar
    Chris

    Hello Norbert Lehmann,

    Sorry, my bad.

     Unfortunately the IR LEDs can't be turned off manually as they are automatically triggered ON / OFF by a light detection sensor on the camera.

    If you put tape on the LEDs, you would not get IR recordings in dark surroundings.

    Thanks!

  • 0
    Avatar
    Y F

    If I put a piece of tape on the IR LED, will the IR always remain on, as it detects its dark?

    where is the sensor that triggers the IR to turn on?

  • 0
    Avatar
    Chris

    Hello YF

     The IR turn on/off are not detected by the LED's but a sensor in the dashcam so covering the LED's won't render the IR to get off.

     

    Thank you 

  • 0
    Avatar
    Y F

    Thank you .

    where is the IR sensor located?

  • 0
    Avatar
    Chris

    The IR sensor is located just above the IR light which is at the external side.

    Thank you

Please sign in to leave a comment.