because i had to mount the forward cam rotated by 180° i now have the problem, that the picture is flipped as well - what had to be expected. i have an older DR500GW with alternate firmware. with this, i was able to configure the cam for the rotated installation. beside the fact, that the software has an option to flip the image, what results in an inverted overlay of the written text in the picture, the option for inverted view is available for the rear cam.
to come to the point: please establish a configuration switch for _the front cam_ as well, in case it has to be installed with the power-connector to the left/rotated by 180°.