3 comments
-
Zoltan Mohos One of my 124X has a mobile hotspot on the USB port. I installed it 4 days ago, I have not been under the seat since. Last night I wanted to test the battery, so I removed the dashcam. The battery remained 100% with an out current of 0.0A for many hours. So, it seems that it did not charge the hotspot while the camera was disconnected. But the hotspot is still working. I checked the car an hour ago.
I will check this evening if the hotspot charges while the camera is off. And I try the USB port with a heater or lamp to see how it drains the battery.
-
Zoltan Mohos I tested it last night.
- Yes, the USB is always on.
- And the output current does not show the USB port, only the current that the dashcam draws!!!!!!!!!
- Accordingly, the calculation of the time remaining is incorrect!!!!!!!
- I only tested these things for a few hours, so the battery did not die, but I am sure it can eat up the whole battery.
- Just like the dashcam. There is even a feature in the battery to override the time out set in the camera.
- But I don't think it is a problem that the battery can run dry. This battery is meant to work as long as it can, and it does not need to start your car's engine, so let it die.
-
Irish Arabic For a significant number of hours, the battery maintained a charge of 100% while having an outgoing current of 0.0A. Consequently, it would seem that the hotspot was not charged at all when the camera was detached. However, the wireless hotspot is still operational.
https://helpcenter.blackvue.com/hc/en-us/community/posts/8234551232409-B124X-usb-power-always-on-snow rider 3d